NETGEAR WGR614 v4 manual Router’s Front Panel, LED Descriptions

Reference Manual for the 54 Mbps Wireless Router WGR614 v4

The Router’s Front Panel

The front panel of the WGR614 v4 router contains the status LEDs described below.

Figure 2-1: WGR614 v4 Front Panel

You can use some of the LEDs to verify connections. Viewed from left to right, Table 2-1describes the LEDs on the front panel of the router. These LEDs are green when lit.

Table 2-1.	LED Descriptions
Label	Activity	Description
	On	Power is supplied to the router.
	Off	Power is not supplied to the router.
Power
	On	The Internet (Wide Area Network) port has detected a link with an
	Blink	attached device.
Internet		Data is being transmitted or received by the Internet port.
	On	Indicates that the Wireless port is initialized.
Wireless
	On (Green)	The Local (LAN) port has detected link with a 100 Mbps device.
	Blink (Green)	Data is being transmitted or received at 100 Mbps.
Local	On (Amber)	The Local port has detected link with a 10 Mbps device.
	Blink (Amber)	Data is being transmitted or received at 10 Mbps.
	Off	No link is detected on this port.
2-6		Introduction
		December 2003