Reference Manual for the 54 Mbps Wireless Router WGR614 v4
•Automatic Configuration of Attached PCs by DHCP
The WGR614 v4 router dynamically assigns network configuration information, including IP, gateway, and domain name server (DNS) addresses, to attached PCs on the LAN using the Dynamic Host Configuration Protocol (DHCP). This feature greatly simplifies configuration of PCs on your local network.
•DNS Proxy
When DHCP is enabled and no DNS addresses are specified, the router provides its own address as a DNS server to the attached PCs. The router obtains actual DNS addresses from the ISP during connection setup and forwards DNS requests from the LAN.
•PPP over Ethernet (PPPoE)
PPPoE is a protocol for connecting remote hosts to the Internet over a DSL connection by simulating a
Easy Installation and Management
You can install, configure, and operate the 54 Mbps Wireless Router WGR614 v4 within minutes after connecting it to the network. The following features simplify installation and management tasks:
•
•Smart WizardTM
The WGR614 v4 router Smart Wizard automatically senses the type of Internet connection, asking you only for the information required for your type of ISP account.
•Visual monitoring
The WGR614 v4 router’s front panel LEDs provide an easy way to monitor its status and activity.
Maintenance and Support
NETGEAR offers the following features to help you maximize your use of the WGR614 v4 router:
•Flash memory for firmware upgrade
•Free technical support seven days a week,
Introduction |
December 2003
