NETGEAR WGR614 v4 manual Reference Manual for the 54 Mbps Wireless Router WGR614

Reference Manual for the 54 Mbps Wireless Router WGR614 v4

•Send to this e-mail address

Enter the e-mail address to which logs and alerts are sent. This e-mail address will also be used as the From address. If you leave this box blank, log and alert messages will not be sent via e-mail.

You can specify that logs are automatically sent to the specified e-mail address with these options:

•Send alert immediately

Check this box if you would like immediate notification of attempted access to a blocked site.

•Send logs according to this schedule

Specifies how often to send the logs: None, Hourly, Daily, Weekly, or When Full.

–Day for sending log. Specifies which day of the week to send the log. Relevant when the log is sent weekly or daily.

–Time for sending log. Specifies the time of day to send the log. Relevant when the log is sent daily or weekly.

If the Weekly, Daily or Hourly option is selected and the log fills up before the specified period, the log is automatically e-mailed to the specified e-mail address. After the log is sent, the log is cleared from the router’s memory. If the router cannot e-mail the log file, the log buffer may fill up. In this case, the router overwrites the log and discards its contents. If you don't want logs sent, select None from the list in the Send Logs According To This Schedule area. When you turn on e-mail notification and choose None in the Send Logs According to this Schedule list, the alert is sent but not the log.

The WGR614 v4 router uses the Network Time Protocol (NTP) to obtain the current time and date from one of several Network Time Servers on the Internet. In order to localize the time for your log entries, you must specify your Time Zone:

•Time Zone. Select your local time zone. This setting will be used for the blocking schedule and for time-stamping log entries.

•Daylight Savings Time. Check this box if your time zone is currently under daylight savings time.

Note: If your region uses Daylight Savings Time, you must manually select Adjust for Daylight Savings Time on the first day of Daylight Savings Time, and unselect it at the end. Enabling Daylight Savings Time will cause one hour to be added to the standard time.

4-8 Content Filtering

December 2003