Yamaha RX-V496RDS owner manual Specifications

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power
20 Hz to 20 kHz, 0.06% THD, 8 ohms
Main L/R, Center, Rear L/R		70 W*/65 W
1 kHz, 0.09% THD, 8 ohms
Main L/R, Center, Rear L/R		80 W*/70 W
• Maximum Output Power (EIAJ)
1 kHz, 10% THD, 8 ohms		100 W
• DIN Standard Output Power
1 kHz, 0.7% THD, 4 ohms		100 W
• IEC Output Power
1 kHz, 0.06% THD, 8 ohms		70 W
• Dynamic Power (IHF)
8/6/4/2 ohms	100/120/140/160 W*, 90/110/130/150 W
• Damping Factor
20 Hz to 20 kHz, 8 ohms		60
• Frequency Response
CD etc. to MAIN L/R		20 Hz to 20 kHz, ±0.5 dB
• Total Harmonic Distortion (20 Hz to 20 kHz)
CD etc. to MAIN L/R, 1/2 power, 8 ohms		0.025%

•Signal-to-Noise Ratio (IHF-A Network) CD etc. to MAIN L/R

(150 mV, Input Shorted)	96 dB
(250 mV, Input Shorted)	100 dB
• Residual Noise..............................................................................(IHF-A Network)	150 μV
MAIN L/R
• Input Sensitivity/Impedance
CD etc	150 mV/47 k-ohms
EXT. DECODER	150 mV/40 – 47 k-ohms
• Output Level/Impedance
REC OUT	150 mV/1.2 k-ohms
SUBWOOFER	4.0 V/1.2 k-ohms
PHONES	0.47 V/390 ohms

• Channel Separation (Vol. –30 dB)

CD etc. (Input 5.1 k-ohms Terminated, 1 kHz/10 kHz)

.....................................................................................	60 dB/45 dB
• Tone Control Characteristics
BASS: Boost/cut	±10 dB/50 Hz
TREBLE: Boost/cut	±10 dB/20 kHz
* for U.S.A. and Canada models

VIDEO SECTION

• Video Signal Type	NTSC or PAL
• Video Signal Level	1 Vp-p/75 ohms
• Signal-to-Noise Ratio	50 dB
• Monitor Out Frequency Response	5 Hz to 10 MHz, –3 dB

FM SECTION

• Tuning Range	87.5/87.50 to 107.9/108.00 MHz
• Usable Sensitivity (DIN)		0.9 μV
Mono (S/N 26 dB)
Stereo (S/N 46 dB)		28 μV
• Selectivity (two signals, 40 kHz Dev., ±300 kHz)		...................... 55 dB
• Signal-to-Noise Ratio (Mono/Stereo)
DIN		75 dB/69 dB
IHF		81 dB/75 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo		0.1/0.2%
• Stereo Separation (1 kHz)		48 dB
• Frequency Response	20 Hz to 15 kHz, ±1 dB
• Antenna Input		75 ohms, Unbalanced

AM SECTION

• Tuning Range	530/531 to 1,710/1,611 kHz
• Usable Sensitivity	300 μV/m
• Signal-to-Noise Ratio	52 dB
• Antenna	Loop antenna

GENERAL

• Power Supply
[U.S.A. and Canada models]		AC 120 V, 60 Hz
[Europe, U.K. and Singapore models]		AC 230 V, 50 Hz
[Australia model]		AC 240 V, 50 Hz
[China model]		AC 220 V, 50 Hz
[General model]	AC 110/120/220/240 V, 50/60 Hz
• Power Consumption		approx. 220 W
• AC Outlets (100 W max. total)
[U.K. and Australia models]		1 (SWITCHED)
[Other models]		2 (SWITCHED)

• Dimensions (W x H x D)

.....................	435 x 151 x 391 mm (17-1/8’’ x 5-15/16’’ x 15-3/8’’)
• Weight	10 kg (22 lbs.)
• Accessories	AM loop antenna
..........................................................................	Indoor FM antenna
.....................	75-ohm/300-ohm antenna adapter (U.K. model only)
........................	Antenna adapter (U.S.A. and Canada models only)
.................................................................................	Remote control
...........................................................................................	Batteries

Specifications are subject to change without notice.

APPENDIX

English

53