4.3.12 - Description of the Alarms menu
This menu is used to display and reset up to 5 active alarms. It also permits alarm reset. If no alarm is active this menu is not accessible. See section 6 for a complete description of the alarm codes and alarm reset.
ALARMS MENU
ITEM # | FORMAT | COMMENTS |
0 [1] | X ALArM | X alarms are active |
| rESEt ALArM | Reset of alarms is requested |
|
| To reset all active alarms, continuously press |
|
| the Enter key. ‘rESET ALArM’ is then displayed. |
|
| Press the select key again: all alarms are reset. |
|
|
|
1 [1] | 1 to 55 | Current alarm code 1* |
|
|
|
2 [1] | 1 to 55 | Current alarm code 2* |
|
|
|
3 [1] | 1 to 55 | Current alarm code 3* |
|
|
|
4 [1] | 1 to 55 | Current alarm code 4* |
5 [1] | 1 to 55 | Current alarm code 5* |
|
|
|
1 This item is masked when nil
*Pressing the Enter key when alarm code is displayed causes the following message to be scrolled:
“time of alarm” “date of alarm” “full CCN alarm message”
-“time of alarm”: xxhmm
-“date”:
-“full CCN alarm message”: up to 64 characters
4.3.13 - Description of the Alarms History menu
ALARMS HISTORY MENU
ITEM # | FORMAT | COMMENTS |
1 [1] | 1 to 55 | Alarm history code 1* |
2 [1] | 1 to 55 | Alarm history code 2* |
3 [1] | 1 to55 | Alarm history code 3* |
|
|
|
4 [1] | 1 to 55 | Alarm history code 4* |
|
|
|
5 [1] | 1 to 55 | Alarm history code 5* |
|
|
|
6 [1] | 1 to 55 | Alarm history code 6* |
|
|
|
7 [1] | 1 to 55 | Alarm history code 7* |
|
|
|
8 [1] | 1 to 55 | Alarm history code 8* |
9 [1] | 1 to 55 | Alarm history code 9* |
10 [1] | 1 to 55 | Alarm history code 10* |
|
|
|
1 This item is masked when nil
*Pressing the Enter key when alarm code is displayed causes the following message to be scrolled:
“time of alarm” “date of alarm” “full CCN alarm message”
-“time of alarm”: xxhmm
-“date”:
-“full CCN alarm message”: up to 64 characters
4.3.14 - Runtime menu description
RUNTIMES
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RUNTIMES 1 |
|
| RUNTIMES 2 |
|
| MAINTENANCE | |||
[runtiMES 1] |
|
| [runtiMES 2] |
|
| [MAintEnAnCE] | |||
|
|
|
|
|
|
|
|
|
|
NOTE: The items in brackets show what is displayed on the user interface.
4.3.14.1 - Description of the Runtimes 1 menu
RUNTIMES MENU [2]
ITEM # | FORMAT | UNITS | COMMENTS |
0 | - | - | When selected this item |
|
|
| authorises return to the |
|
|
| previous menu |
|
|
|
|
1 | nnnn M 10 M100 | hrs/10 or 100 | Unit operating hours* |
|
|
|
|
2 [1] | nnnn M 10 M100 | hrs/10 or 100 | Unit operating hour in cooling |
|
|
| mode |
3 [1] | nnnn M 10 M100 | hrs/10 or 100 | Unit operating hours in heating |
|
|
| mode |
4 | nnnn M 10 M100 | hrs/10 or 100 | Compressor A1 operating |
|
|
| hours* |
5 [1] | nnnn M 10 M100 | hrs/10 or 100 | Compressor A2 operating |
|
|
| hours* |
|
|
|
|
6 [1] | nnnn M 10 M100 | hrs/10 or 100 | Compressor A3 operating |
|
|
| hours* |
|
|
|
|
7 [1] | nnnn M 10 M100 | hrs/10 or 100 | Compressor B1 operating |
|
|
| hours* |
8 [1] | nnnn M 10 M100 | hrs/10 or 100 | Compressor B2 operating |
|
|
| hours* |
9 [1] | nnnn M 10 M100 | hrs/10 or 100 | Compressor B3 operating |
|
|
| hours* |
|
|
|
|
10 | nnnn M 10 M100 | Machine starts* | |
11 | nnnn M 10 M100 | Compressor A1 starts* | |
12 [1] | nnnn M 10 M100 | Compressor A2 starts* | |
13 [1] | nnnn M 10 M100 | Compressor A3 starts* | |
14 [1] | nnnn M 10 M100 | Compressor B1 starts* | |
15 [1] | nnnn M 10 M100 | Compressor B2 starts* | |
16 [1] | nnnn M 10 M100 | Compressor B3 starts* | |
|
|
|
|
17 [1] | nn | hrs/10 or 100 | Pump #1 operating hours* |
|
|
|
|
18 [1] | nn | hrs/10 or 100 | Pump #2 operating hours* |
|
|
|
|
1 This item is masked when not used
NOTES
*Certain values are divided by 10 or by 100, so that number of hours or start- ups of less then 10 are displayed as 0.
When the value is divided by 10 or by 100 it is displayed in turn with “M 10” or “M100”.
28