Section 1 – Overview

1.1Introduction

Function

The UDC 3300 is a microprocessor-based stand alone controller. It

 

combines the highest degree of functionality and operating simplicity

 

offered in a 1/4 DIN size controller.

 

With a typical accuracy of ± 0.20 % of span, the UDC 3300 is an ideal

 

controller for regulating temperature and other process variables in

 

numerous heating and cooling applications, in metal working, food, and

 

pharmaceuticals, and testing and environmental work.

Easy to read displays

The dedicated vacuum fluorescent displays with multi-language prompts

 

make the operator interface easy to read, understand and operate.

 

Programmed sequences of displays assure quick and accurate entry of all

 

configurable parameters.

Easy to operate

Simple keystrokes let you select input and range configuration, set the operating parameters that meet your process control needs now, and change them later to meet new ones.

The tactile keyboard provides positive operator feedback. Self diagnostics, fault tolerant design and keyboard security provide maximum assurance of trouble-free operation.

Mount anywhere

The UDC is industrial control equipment that must be panel mounted. The wiring terminals must be enclosed within the panel. The UDC is environmentally hardened and, when suitably enclosed, can be mounted virtually anywhere in plant or factory; on the wall, in a panel, or even on the process machine. It withstands ambient temperatures up to 55 °C (133 °F) and resists the effects of vibration and mechanical shock.

CE Conformity (Europe) This product is in conformity with the protection requirements of the following European Council Directives: 73/23/EEC, the Low Voltage Directive, and 89/336/EEC, the EMC Directive. Conformity of this product with any other “CE Mark” Directive(s) shall not be assumed.

Product Classification: Class I: Permanently connected, panel-mounted Industrial Control Equipment with protective earthing (grounding). (EN61010-1).

Enclosure Rating: Panel-mounted equipment, IP 00. This controller must be panel-mounted. Terminals must be enclosed within the panel. Front panel IP 65 (IEC 529).

Installation Category (Overvoltage Category): Category II: Energy- consuming equipment supplied from the fixed installation, local level appliances, and Industrial Control Equipment. (EN61010-1)

Pollution Degree: Pollution Degree 2: Normally non-conductive pollution with occasional conductivity caused by condensation. (Ref. IEC 664-1)

4/00

UDC 3300 Controller Product Manual

1

Page 13
Image 13
Honeywell UDC 3300 Introduction, Offered in a 1/4 DIN size controller, Pharmaceuticals, and testing and environmental work