Honeywell UDC 3300 manual Two Sets of Tuning Parameters for Single Output Operation, PB or Gain

11.3 Time Proportional Duplex or Current Proportional Duplex Control

Introduction	For HEAT/COOL applications.
	Tune the controller with the output above 50% for Heat and below 50%
	for Cool.
HEAT/COOL prompts	The “TUNING” function prompts for HEAT/COOL are:
	HEAT	COOL
	PB or GAIN	GAIN2
	RSETMIN or RSETRPM	RSET2MIN or RSETRPM2
	RATEMIN	RATE2MIN
	CYCSEC	CYC2SEC

11.4 Two Sets of Tuning Parameters for Single Output Operation

Introduction

TWO SETS prompts

You can use two sets of tuning constants for single output types and tune each set separately.

The “TUNING” function prompts for two sets are:

PID SET 1		PID SET 2
PB or GAIN		GAIN2
RSETMIN or RSETRPM	RSET2MIN or RSETRPM2
RATEMIN	RATE2MIN
CYCSEC	CYC2SEC

276 UDC 3300 Controller Product Manual 4/00