Honeywell UDC 3300 Radiamatic, millivolts, or volts except 0 to 10 volts inputs, Volts only Input

Radiamatic, millivolts, or volts (except 0 to 10 volts) inputs

Use the copper leads and connect the calibrator to the rear terminals of Input #1, #2, or #3. See Figure 7-5.

Figure 7-5 Wiring Connections for Radiamatic, Millivolts, or Volts

(except 0 to 10 Volts)

				10	1
			L1	11	2
Input 3*	+		L2/N	12	3
(0-5, 1-5		+	22	13	4
volts only)			23	14	5
Input 2*		–
			24	15	6
		+	25	16	7
			26	17	8
Input 1		–
			27		9

–	Millivolt/Volt
+
	Source

Copper Leads 24177

*Terminals for Input 3 are 22 (+) and 24 (–). Terminals for Input 2 are 23 (+) and 24 (–).

226 UDC 3300 Process Controller Product Manual 4/00