Honeywell UDC 3300 manual Desired span value, Lower Display SET UP

Step Description

8Exit the Calibration Mode

Press

or

FUNCTION

LOOP 1/2

LOWER

DISPLAY

or

SET UP

Action

until the desired span value is reached in the upper display.

Upper Display

The desired span value

Lower Display

SPAN VAL

For manual calibration, the motor does not move from its position prior to the start of Position Proportional calibration.

The controller will store the 100 % value.

To exit the calibration mode.

4/00 UDC 3300 Controller Product Manual 239