Honeywell UDC 3300 manual Step Operation, SET UP Lower Display

Step

4

5

6

7

Operation

Select other Function Parameters

Change the value or selection

Enter the value or selection

Exit Configuration

Press

FUNCTION

LOOP 1/2

or

FUNCTION

LOOP 1/2

or

SET UP

LOWER DISPLAY

Result

Successive presses of the FUNCTION key will

sequentially display the other function prompts of the Set Up group you have selected.

Stop at the function prompt that you want to change, then proceed to the next step.

These keys will increment or decrement the value or selection that appears for the function prompt you have selected.

See “Configuration Tips” for instructions to increase or decrease value quickly.

Change the value or selection to meet your needs.

If the display flashes, you are trying to make an unacceptable entry.

This key selects another function prompt.

This key selects another Set Up group.

The value or selection you have made will be entered into memory after another key is pressed.

This exits configuration mode and returns the controller to the same state it was in immediately preceding entry into the Set Up mode. It stores any changes you have made.

4/00 UDC 3300 Process Controller Product Manual 41