Honeywell UDC 3300 manual Enabling or disabling the remote setpoint, Setpoint selection indication

Enabling (or disabling) the remote setpoint

Use the procedure in Table 5-12 to enable the remote setpoint source.

Table 5-12 Procedure for Enabling (or Disabling) the Remote Setpoint

Step

1

2

3

4

Operation

Select Set Up Group

Select the Remote Setpoint Source prompt

Change selection

Return to normal operation

Press

SET UP

FUNCTION

LOOP 1/2

or

LOWER DISPLAY

			Action
until you see:
	Upper Display		Upper Display
	SET UP		SET UP
	Lower Display		Lower Display
	CONTROL		CONTROL2
	for Loop 1	or for Loop 2
Until you see:
	Upper Display	The Remote Setpoint
		source selection
	Lower Display
		NONE— not used
	RSP SRC	INP 2— Input 2 as RSP
		IN AL1— Input algorithm 1
		IN AL2— Input algorithm 2
		INP 3— Input 3 as RSP

to enable or disable the remote setpoint.

ATTENTION You cannot change the remote setpoint value using these keys.

This will return the controller to normal operation.

Setpoint selection indication

Table 5-13 shows how the indicators react and what the displays show for each type of setpoint.

Table 5-13

Setpoint Selection Indication

Upper

Display

Using Local

Setpoint

SP

PV and the PV value

Using Remote

Setpoint

RSP

PV and the PV value

Using 2nd

Local

Setpoint

2SP

PV and the PV value

Using 3rd

Local

Setpoint

3SP

PV and the PV value

Lower

Display

Annunciator

SP and the

Local Setpoint

Source

None

RSP and	2SP and the	3SP and the
Remote Setpoint	2nd Local	3rd Local
Value	Setpoint Value	Setpoint Value
"■" lights	"■" lights	"3" lights

162 UDC 3300 Controller Product Manual 4/00