Overview

Introduction

This guide explains how to install software from the installation CD onto your server and how to configure the resources resident on the server to support Compaq T1500 Windows-Based Terminals for this software release.

How to Use This Guide

For full access to all the terminal resources, you will need to plan and configure your server setup as explained in Chapter 1 of this guide.

If you only want to verify basic operation of the terminal using local boot, go directly to the quick-start procedure in Appendix A. However, you will have only limited access to the terminal resources.

Terminal setup information is available from help files resident on the terminals and complete instructions are available on line after terminal-server communication is established.

References

The following Requests for Comments (RFCs) should be reviewed:

Note

RFCs are freely available through the World-Wide

Web. They can be accessed from sites such as: http://

www.cis.ohio-state.edu/hypertext/information/rfc.html

Page 13
Image 13
Compaq T1500 manual Overview, Introduction, How to Use This Guide, References