Compaq T1500 manual Nfs

24Chapter 3

Because of limited local storage capacity in the terminal, the fonts resident on the terminal are the minimum set for use with all applications. If a locally booted terminal uses the network services director, additional fonts are automatically made available. All the network services are already provided for the users who perform a network boot; no additional measures need to be taken to ensure that this group of users enjoys these benefits.

Note

SMB file sharing can not be used to support swapping; only NFS will support this function. All other services are supported by both file-sharing services.

NFS

Refer to Chapter 2 for more information on configuring NFS. The Select System Setup Administration Network Services dialog box can be used to configure the terminal for both swapping and print spooling.

In a network-boot environment, spooling is automatic and is on the root NFS directory tree as described in Chapter 2. Swapping is optional, with the size of the swap area based upon the setting of the slider in the Network Services dialog box. Swapping can be disabled through the use of DHCP options as described in Chapter 2.

In a local-boot environment, spooling is optional. If a network services directory is provided, spooling is available; otherwise, spooling is not available.

If NFS network services is desired, the information specified in Chapter 2 (with respect to permissions and mapping) applies. In addition, terminals write to the root directory of the NFS mount point, so permissions must be set accordingly.

SMB

SMB is the Microsoft network protocol used for file, directory, and print services.

If directory services are required, the network share, which is being exported as the network services directory, must be configured for guest access. It must not be password-protected for guest access, and must appear on a server browse list when queried from a remote computer. Ideally, the NT server that is providing the service will also be in DNS; otherwise, it must be put in the terminal’s HOSTS file (under Select System Setup Internet Hosts) for name resolution to occur, and an IP address must also be associated with it. The terminal must additionally be able to create directories at the root level of the share and be able to create, modify, and delete files on the share.