EMC 69001166 manual Server, Right LED is off, which

Linux Installation Checklist

Task		With Access Logix	Without Access Logix	Reference Document
8	Server	❑ Cable any additional HBA ports to	❑ Cable any additional HBA ports to	Storage-system setup
	Cable additional	the switch connected to the	the switch connected to the	guide.
		storage system or to SP ports.	storage system or to SP ports.
	HBAs to
	switches or	❑ Checkpoint - For a SAN, verify	❑ Checkpoint - For a SAN, verify
	storage system
		the HBA connections to the	the HBA connections to the
		switch by checking the LED(s) for	switch by checking the LED(s) for
		the switch port connected to each	the switch port connected to each
		additional HBA port.	additional HBA port.
		For a 1-Gbit switch - LED is	For a 1-Gbit switch - LED is
		green, which indicates that the	green, which indicates that the
		HBA port is logged in to the	HBA port is logged in to the
		switch port.	switch port.
		For a 2-Gbit switch - One of the	For a 2-Gbit switch - One of the
		following:	following:
		• The left LED is green and the	• The left LED is green and the
		right LED is off, which	right LED is off, which
		indicates that a 1-Gbit SP port	indicates that a 1-Gbit SP port
		is logged in to the switch port.	is logged in to the switch port.
		• For a DS-xxB2 switch, both	• For a DS-xxB2 switch, both
		LEDs are green, which	LEDs are green, which
		indicates that a 2-Gbit HBA	indicates that a 2-Gbit HBA
		port is logged in to the switch	port is logged in to the switch
		port.	port.
		• For a DS-xxM2 switch, the left	• For a DS-xxM2 switch, the left
		LED is blue and the right LED	LED is blue and the right LED
		is off, which indicates that a	is off, which indicates that a
		2-Gbit HBA port is logged in to	2-Gbit HBA port is logged in to
		the switch port.	the switch port.
9	Switches	For a SAN	For a SAN	Switch management
	Zone for	❑ Zone the switches to provide a	❑ Zone the switches to provide a	documentation
	additional HBAs	path from each additional HBA	path from each additional HBA
		port (host initiator) to the SPs.	port (host initiator) to the SPs.
		❑ Checkpoint - Use switch	❑ Checkpoint - Use switch
		management software to verify	management software to verify
		the switch connections to the	the switch connections to the
		storage system.	storage system.
10	Server	❑ Add persistent bindings to the	❑ Add persistent bindings to the	HBA documentation
	Add Persistent	HBA driver configuration file.	HBA driver configuration file.	(see URL on page 3-4)
	Bindings	Note: You need the WWPN of	Note: You need the WWPN of
		each SP port for the bindings.	each SP port for the bindings.

3-34

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems