EMC 69001166 manual For SAN with CX200, CX400, or, CX600 storage systems, Systems

Windows Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
4 Server	For SAN with CX200, CX300, CX400,	For SAN with CX200, CX400, or	Storage-system setup
Cable to Fibre	CX500, CX600, or CX700 storage	CX600 storage systems	guide
	systems
Channel		❑ Cable the HBA ports to the Fibre
switches,	❑ Cable the HBA ports to the Fibre	Channel switch connected to the
network, or	Channel switch connected to the	storage system.
storage-system	storage system.
data ports	❑ Checkpoint - For a SAN, verify	❑ Checkpoint - For a SAN, verify
	the HBA connections to the	the storage-system connections
	switch by checking the LED(s) for	to the switch by checking the
	the switch port connected to each	LED(s) for the switch port
	HBA port.	connected to each HBA port.
	For a 1-Gbit switch - LED is	For a 1-Gbit switch - LED is
	green, which indicates that the	green, which indicates that the
	HBA port is logged in to the	HBA port is logged in to the
	switch port.	switch port.
	For a 2-Gbit switch - One of the	For a 2-Gbit switch - One of the
	following:	following:
	• The left LED is green and the	• The left LED is green and the
	right LED is off, which	right LED is off, which
	indicates that a 1-Gbit SP port	indicates that a 1-Gbit SP port
	is logged in to the switch port.	is logged in to the switch port.
	• For a DS-xxB2 switch, both	• For a DS-xxB2 switch, both
	LEDs are green, which	LEDs are green, which
	indicates that a 2-Gbit HBA	indicates that a 2-Gbit HBA
	port is logged in to the switch	port is logged in to the switch
	port.	port.
	• For a DS-xxM2 switch, the left	• For a DS-xxM2 switch, the left
	LED is blue and the right LED	LED is blue and the right LED
	is off, which indicates that a	is off, which indicates that a
	2-Gbit HBA port is logged in to	2-Gbit HBA port is logged in to
	the switch port.	the switch port.

7-26

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems