EMC 69001166 manual With a license Key

Windows Installation Checklists

Task	With Access Logix	Without Access Logix	Reference Document
17 Server	❑ View the output of the powermt	❑ View the output of the powermt	PowerPath product
Test PowerPath	display dev=x every=2	display dev=x every=2	guide
	command, and verify that	command, and verify that
with a license
key (cont.)	• The state of the uncabled	• The state of the uncabled
	path(s) becomes “dead.”	path(s) becomes “dead.”
	• I/O continues to the remaining	• I/O continues to the remaining
	path(s) to the LUN, indicating	path(s) to the LUN, indicating
	that the path failover was	that the path failover was
	successful, and PowerPath is	successful, and PowerPath is
	working properly.	working properly.
	❑ Reconnect the cable that you	❑ Reconnect the cable that you
	disconnected from the HBA.	disconnected from the HBA.
	❑ If you did not follow the above	❑ If you did not follow the above
	steps exactly and caused any	steps exactly and caused any
	LUNs to trespass, restore the	LUNs to trespass, restore the
	LUNs to their original SP with the	LUNs to their original SP with the
	following PowerPath command:	following PowerPath command:
	powermt restore	powermt restore

7-56

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems