EMC 69001166 manual Tru64 Unix Configurations, Storage systems

Tru64 UNIX Installation Checklist

Tru64 UNIX Configurations

	Read this section if you are installing a Tru64 UNIX configuration
	with a new server and a new storage system. A new server and
	storage system are defined as follows:
	New server - A server running Tru64 UNIX and not connected to any
	storage system.
	New storage system - A CX500 or CX700 storage system that has the
	factory default settings and has never been connected to a server.
Prerequisites	◆ All switches must be installed.
	◆ Storage systems must be set up, initialized (if required), and
	connected to switches, and any optional storage-system software
	(Access Logix, SAN Copy, SnapView, MirrorView,
	MirrorView/A) must be installed.
	◆ If you will use Navisphere Manager 6.X, you must have a host
	that is
	• Running an operating system that can support the Navisphere
	Manager 6.X browser-based client. For an up-to-date list of
	such operating systems, refer to the Navisphere Manager 6.X
	release notes on http://powerlink.emc.com.
	• On a network that is connected to the storage-system servers
	and that will be connected to the SPs in CX500 or CX700
	storage systems.

6-2

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems