EMC 69001166 manual Tru64 Unix documentation Execute the following command, For Boot LUN

				Tru64 UNIX Installation Checklist
Task		With Access Logix		Reference Document
10	Server	❑ At the SRM console, execute the init command.		Host connectivity guide for Tru64 UNIX
	Update SRM Console			and Tru64 UNIX documentation
		❑	Execute the following command:
	for Boot LUN
			wwidmgr -quickset -udid udid-num
			where udid-numis the UDID number of the boot LUN.
		❑ At the SRM console, execute the init command again.
		❑ Checkpoint — Verify that the boot LUN is visible with
			the following command:
			show device
			Only one entry for the LUN should appear in the device
			list for each path between the server and the storage
			system.
		❑ Set the boot LUN as default boot device with the
			following command:
			set bootdef_dev
			being sure to include all paths to the boot LUN.
		❑ Boot the server with the following command:
			boot
11	Storage System	❑ For Navisphere 6.X, use Navisphere Manager to define		Navisphere security administrator’s
	Set up security		a global administrator (if not already defined) and any	guide and Navisphere Manager online
			additional users.	help
12	Storage System	❑ Use Navisphere Manager to set general storage-system
	Configure		properties.
		❑ Use Navisphere Manager to create additional RAID
			Groups (if desired), bind LUNs, and assign the LUNs to
			the Storage Group.
13	Storage System	❑	Plan your monitoring configuration.	Navisphere Manager administrator’s
	Set up Event Monitor			guide and online help
		❑ Use Navisphere Manager to set user options, create
			templates, and set up your monitoring configuration.

Checklist - New Tru64 UNIX Server and New Storage System With Boot Disk

6-9