EMC 69001166 manual PowerPath Configurations for HP-UX

HP-UX Installation Checklist

PowerPath Configurations for HP-UX

Read this section if you are installing an HP-UX® PowerPath™ configuration with a new or existing server and a new or existing storage system. A new and existing server and a new and existing storage system are defined as follows:

new server - A server running HP-UX and not connected to any storage system.

existing server - A server running HP-UX that is already connected to one or more storage systems.

new storage system - A CX300, CX500, or CX700 storage system that has the factory default settings and has never been connected to a server.

existing storage system - A CX300, CX400, CX500, CX600, CX700, FC4500, or FC4700-Series storage system that is already connected to one or more servers and is in an EMC Navisphere® domain.

All CLARiiON storage systems connected to the server must be CX300, CX400, CX500, CX600, CX700, FC4500, or FC4700-Seriesstorage systems. If any other type of CLARiiON storage system is connected to the server, the server cannot run PowerPath.

Topics relating to the checklists for HP-UX PowerPath configurations are

◆ Required Host Software Revisions		2-3
◆	Prerequisites	2-3
◆	Documentation	2-4

◆PowerPath Checklist - New HP-UX Server and New Storage

System 2-7

◆PowerPath Checklist - New HP-UX Server and Existing Storage

System 2-13

◆PowerPath Checklist - Existing HP-UX Server and New Storage

System 2-26

◆PowerPath Checklist - Existing HP-UX Server and Existing

Storage System 2-33

2-2

EMC Installation Roadmap for CX-Series and FC-Series Storage Systems