Vornado VH110 manual Save These Instructions, How To Use, Care & Maintenance

This heater is equipped with a thermal safety shut-off system, designed to turn off the heater when an internal overheating condition is detected (see How To Use “RESETTING YOUR VORNADO HEATER,” to determine how to check and reset the heater).

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

Do not operate this product with any electronic speed-control device on the same circuit.

Do not use heater to dry human or animal hair/fur or articles of clothing.

SAVE THESE

INSTRUCTIONS

HOW TO USE

Using your Vornado Heater is easy. Just follow these simple steps.

1.Position your heater so the vortex beam of warm air is directed across the room unobstructed. Position it in a location that is representative of the room temperature. The unique side-angled air inlets allow the heater to be placed closer to walls than possible with most ordinary heaters (but do not place close to combustibles). Avoid areas of temperature extremes such as cold drafts and heat registers. Please refer to IMPORTANT INSTRUCTIONS at the beginning of this owner’s guide.

2.Plug the power cord into a standard wall outlet.

3.Set the POWER switch to ON.

4.Select HIGH or LOW heat.

5.Set THERMOSTAT to the highest setting. When the room reaches the desired comfort level, turn the THERMOSTAT knob slowly counterclockwise until the heat cycles off (easier to detect when FAN is set to AUTO).

CARE & MAINTENANCE

Your heater has no user serviceable parts. Do not disassemble the unit – it will void your warranty. If service is required, return your heater to Vornado (see Warranty section).

The motor is permanently lubricated and requires no oiling.

Because your heater moves a substantial amount of air, it will require regular cleaning. Be sure to unplug the unit prior to any cleaning activity. Use a vacuum cleaner with the brush attachment to clean any accumulated dust on the front grill and the side air inlets.

During the off-season or extended periods of non-use, store your heater. Unplug the unit and bundle the cord. Save the plastic bag the heater was shipped in so you can cover the unit and minimize

settling dust. English 5