Emerson E2 operation manual Down, Level

P/N	Sensor	Input Type	Wiring
		Dip Switch
207-0100	Analog Liquid	Down
	Level		1. Connect RED
			power wire to
			+12VDC source
			on input board.

2. Connect BLACK ground wire to odd numbered ter- minal.

3.Connect GREEN signal wire to

even numbered terminal.

207-1000	Refrigerant	Down
	Level Trans-	1.	Wire BLACK ground
	ducer (Hansen
			wire from “GND”
	Probe)		sensor terminal to odd
			numbered board ter-
			minal.
		2.	Wire GREEN signal
			wire from “SIGNAL”
			sensor terminal to
			even numbered board
			terminal.
		3.	Wire RED power wire
			from “POWER” sen-
			sor terminal to
			+12VDC terminal on
			board.
203-1902	Dewpoint Probe	Up
		1.	Connect the WHITE
			and GREEN wires to
			AC1 and AC2 power
			terminals.
		2.	Connect BLACK
			ground wire to odd
			numbered board termi-
			nal.
		3.	Connect RED signal
			wire to even numbered
			board terminal.

Table 9-1- Sensor Wiring

The 16AI, 8IO, and MultiFlex Inputs Input and Output Setup • 9-5