Emerson E2 Toggling Full Options, Navigation, Menus, Main Menu, System Configuration Menu

12.3 Toggling Full Options

Toggling Full Options on allows you to have full access to programming applications. To Toggle Full Options on:

1.Press the key

2.Select  (System Configuration)

3.Select (System Information)

4.Select (Toggle Full Options)

FULL will appear in the top right corner of the screen when Full Options is enabled. Pressing toggles Full Options on and off.

12.4 Navigation

12.4.1 Menus

Main Menu

The Main Menu is accessed by pressing the  key. This menu gives you direct access to applications such as Suction Groups, Condensers, Circuits, Air Han- dling Units, Zones, Light Schedules, and Sensor Controls applications, (depending on which controller type you are using) as well as all configured applications in the control- ler. The Main Menu also allows you to add and delete applications, gives system configuration abilities, and shows status information for inputs and outputs, network, graphs and logs.

Figure 12-4 - Main Menu

The System Configuration Menu

Figure 12-5- System Configuration Menu

The System Configuration Menu is one of the menus used to set up the E2. Included options are Input/Output Definitions, internal system information, remote commu- nications, global data, alarm, logging, and network setup information.

To open the System Configuration menu:

1.Press 

2.Press (System Configuration)

The System Configuration menu contains nine menu items:

	Menu Option	Description
1	- Input Definitions	View the status of all input
		boards, as well as set up indi-
		vidual points on the I/O
		boards.
2	- Output Definitions	View the status of all output
		boards, as well as set up indi-
		vidual points on the I/O
		boards.
3	- System Information	Menu that gives access to
		more E2 setup options and
		information.
4	- Remote Communica-	Gives access to modem infor-
tions		mation, dial-out setup, and
		TCP/IP.

Table 12-2- System Configuration Menu Options

Toggling Full Options Operator’s Guide to Using the E2 • 12-3