Emerson E2 operation manual Sensor Type Description, Per Pulse on

Figure 9-6- Analog Input Screen

Board/Point # The Board/Point number will auto- matically be defined if you are configuring the point from the Input Status screen, and indicates the physi- cal address of the board.

Point Name The Point Name is simply a name for the point that may be used as a reference.

Assigning a descriptive name to a point makes set- ting up inputs for applications much easier. For example, if you have an inside temperature sensor located in Zone 1 of your building, you may name it “ZONE 1 TEMP”. Then, when programming your HVAC applications, you may easily define Zone 1’s temperature sensor input by tying it to ZONE 1 TEMP. This keeps you from having to keep track of which sensors are tied to which point numbers.

You are required to enter a point name in the Point Name field. The default name is “:{BOARD NAME}:{UNIT NUMBER}:{BOARD NUM- BER}:{POINT NUMBER}.”

Sensor Type The analog input may come from a number of different sensor types.

Sensor Type	Description
Temperature	Emerson Retail Solutions
	Standard Temp Sensor
5V-100 PSI	5VDC 100 PSI transducer
	(0.5-4.5VDC output)
5V-200 PSI	5VDC 200 PSI transducer
	(0.5-4.5VDC output)
5V-500 PSI	5VDC 500 PSI transducer
	(0.5-4.5VDC output)
Table 9-2- Sensor Input Types

Sensor Type	Description
12V-100 PSI	12VDC 100 PSI trans-
	ducer (1-6VDC output)
	(Discontinued)
12V-200 PSI	12VDC 200 PSI trans-
	ducer (1-6VDC output)
	(Discontinued)
12V-500 PSI	12VDC 500 PSI trans-
	ducer (1-6VDC output)
	(Discontinued)
Refrig. Leak	Refrigerant Leak Detector
	(not IRLDS)
Refrig. Level	Refrigerant Liquid Level
	Probe
Liquid Level	Liquid Level Float Sensor
Light Level	Light Level Sensor
Linear	General purpose linear
	output sensor
Humidity	Relative Humidity sensor
Pulse Accum.	Kilowatt value from KW
	transducer pulse accumu-
	lation readings (see Units
	Per Pulse on page 9-9)
KW Transducer	Kilowatt transducer using
	4-20ma/0-5V signal
Dewpoint	Dewpoint probe
LM235 Temp	Linear voltage output
	temperature sensor
PT2 Temp	Danfoss PT2 temperature
	sensor
CDK Temp	CDK 2097MC tempera-
	ture sensor
20K Pot Adjust	Standard temperature sen-
	sor with offset adjust-
	ment (potentiometer)
Table 9-2- Sensor Input Types

9-8 • E2 RX/BX/CX I&O Manual 026-1614 Rev 4 5-JAN-2013