Emerson E2 MultiFlex Boards, MultiFlex 16 Input Board, MultiFlex Combination Input/ Output Boards

custom cell in Einstein/E2

P/N	Gateway Model
810-3500	RF Gateway
810-3700	IRLDS II Gateway
810-3760	RLDS Gateway
810-3710	Danfoss MicroCool Gateway
810-3711	Woodley Case Controller Gateway
810-3712	Woodley Pack Controller Gateway
810-3720	Cutler Hammer Breaker Gateway
810-3721	Square D Breaker Gateway
Table 2-5- Gateway Board Models

2.2.2MultiFlex Boards

The MultiFlex line of control system boards provides a wide variety of input, output, and smart control solutions, all of which are based on a single universal hardware plat- form. The board design uses flash-uploadable firmware and plug-in expansion boards to configure the base plat- form board and apply it for use as an input board, relay output board, analog output board, or a combination I/O board.

2.2.2.1MultiFlex 16 Input Board

Figure 2-6- MultiFlex 16 Input Board

The MultiFlex 16 input board offers sixteen combina- tion analog/digital input points for use by Emerson Retail Solutions E2, Einstein, and REFLECS control systems.

The MultiFlex 16 may be used in retrofits with no addi- tional hardware or software setup or upgrades.

The MultiFlex 16 is designed to be 100% compatible with the previous generation of Emerson Retail Solutions

input boards (the 16AI), communicates with the site con- troller via an RS485 connection to a REFLECS COM A&D Network or an E2 I/O Network. Dip switches on the board set the network ID (board number) and baud rate.

The board also provides both +5VDC and +12VDC output voltage points for use in powering transducers or other input devices that require power.

The MultiFlex 16 has a Hand-held Terminal interface Section 2.2.4, Hand-held Terminal (P/N 814-3110)that may be used by technicians to view the input voltage and engineering unit values for each input point without need of a voltmeter or front panel controller display.

Table 2-6shows the part number of the MultiFlex 16.

P/N	Model Name	Description
810-3013	MultiFlex 16	16 analog/digital in-
		puts, no outputs

Table 2-6- MultiFlex 16 Input Board Model

The MultiFlex 16 is designed with several features that make it easy to install, wire, and configure. These main user interface features are shown in Figure 2-6.

2.2.2.2MultiFlex Combination Input/ Output Boards

Figure 2-7- MultiFlex Combination Input/Output Board (Side View)

2-4 • E2 RX/BX/CX I&O Manual 026-1614 Rev 4 5-JAN-2013