Emerson E2 Two-Channel and Four-Channel Repeaters, Pressure Transducers, Dewpoint Probe

3.3 ECHELON DEVICES		3-5
3.3.1 CC-100 Case Controller and CS-100 Case Circuit Controller		3-5
3.3.2	MultiFlex ESR	3-5
3.3.3	TD3	3-5

3.4COM3 INTERNAL MODEM PLUG-INCARD

(P/N 638-3362)				3-5
3.4.1 Two-Channel and Four-Channel Repeaters				3-6
		3.4.1.1	Mounting Repeaters Overview	3-6
		3.4.1.2 Mounting the Two-Channel Repeater		3-6
		3.4.1.3 Mounting the Four-Channel Repeater		3-6
3.5	SENSORS AND TRANSDUCERS			3-7
3.5.1		Pressure Transducers		3-7
		3.5.1.1	Mounting	3-7
3.5.2		Inside Temperature Sensor		3-7
		3.5.2.1	Location	3-7
		3.5.2.2	Mounting	3-7
3.5.3		Outside Temperature Sensor		3-7
		3.5.3.1	Location	3-7
		3.5.3.2	Mounting	3-7
3.5.4		Insertion Temperature Probe		3-8
		3.5.4.1	Location	3-8
		3.5.4.2	Mounting	3-8
3.5.5 Supply and Return Air Sensors				3-8
3.5.6 Refrigeration System Temperature Probes and Sensors				3-8
		3.5.6.1	Location	3-8
		3.5.6.2 Mounting Bullet and Pipe Mount Sensors		3-8
3.5.7		Product Temperature Probes		3-9
3.5.8 Humidity Sensors and Humidistats				3-9
		3.5.8.1	Indoor RH Sensor	3-9
		3.5.8.2	Outdoor RH Sensors	3-9
		3.5.8.3 Duct-mounted Insertion RH Probe		3-10
3.5.9		Dewpoint Probe		3-10
		3.5.9.1	Location	3-10
		3.5.9.2	Mounting	3-10
3.5.10		Light Level Sensor		3-10
		3.5.10.1	Location	3-10
		3.5.10.2	Mounting	3-10
3.5.11		Liquid Level Sensors		3-11
3.5.12		Refrigerant Leak Detectors		3-11
4	E2 HARDWARE SETUP			4-1
4.1 SETTING UP THE E2				4-1
4.1.1		Enclosure		4-1
4.1.2		Main Processor Board		4-1
4.1.3 Power Interface Board (PIB)				4-2
4.2	POWERING THE E2			4-2
4.2.1		RS485 Ports		4-2
4.2.2 RS485 Termination Jumpers (MODBUS or I/O Net)				4-2
4.2.3		Echelon Network Connect		4-2
4.2.4		Echelon Jumper		4-2
4.3	ADD-ONE2 PERIPHERALS			4-2
4.3.1 Echelon Plug-In Card Kit
(P/N 638-4860)				4-2
4.3.2 COM3 RS232 Plug-In for External Modem (P/N 638-4875)				4-3
4.3.3 COM3 Internal Modem Plug-In Card (P/N 638-3362)				4-3

vi • Table of Contents 026-1614 Rev 4 5-JAN-2013