Emerson E2 operation manual Rescan, Commissioning Screen

5.Locate the device you added to the network list (press and to scroll through the list) and highlight with the cursor. Press for Com- missioning.

Figure 6-13- Commissioning Screen

If there is more than one route, select which route the device is on. The route may be MS/TP or IP.

6.If this is the first commission after a reboot of the E2 (or a new BACnet route is created), the E2 will display a “search dialog” showing the E2 is searching for BACnet devices on that route.

7.The E2 will present a list of device IDs for a set of devices found during the scan when the search is complete. Choose which device (and subse- quent device ID) to associate with that E2 BAC- net application.

8.The same list will appear for subsequent commis- sioning to associate new devices quickly.

A rescan is needed if a new BACnet device is con- nected on the route. Initiate the scan by pressing -

Rescan.

BACnet The RS485 Network and Hardware Setup • 6-15