Emerson E2 operation manual Set Up Alarming, Web Services

Enter your license key to activate the desired feature:

Figure 10-34- Enter Your Unique License Key

4.Reboot the controller and open the License Report screen again to see the license key appear next to the activated feature (Figure 10-35):

Figure 10-35- License Report Screen

10.15.1 Web Services

Web Services is a licensed feature that allows the user, once the required license has been obtained and entered, to view and adjust certain parameters in the E2 controller through a Web page. The E2 Web Services feature enables the user to:

•View site-specific information such site name, site phone, local date and time.

•View the current version of the E2. This includes the type of unit (e.g., RX-400) and the version of the firmware.

•View global data values such as outside air tem- perature and humidity.

•View a list of other networked area controllers at the site, including version and controller type infor-

mation.

•Connect to the selected E2 for remote configuration changes.

•Access Terminal Mode.

•View Alarms.

To access Web Services:

Open a browser window and enter the IP Address of your E2 controller:

Figure 10-36- E2 Web Services Page

10.16 Set Up Alarming

To set up alarms, open the Alarm Setup menu:

1.Press to open the Main Menu

2.Press (System Configuration)

3.Press (Alarm Setup)

10-20 • E2 RX/BX/CX I&O Manual 026-1614 Rev 4 5-JAN-2013