Emerson E2 operation manual Sensor Input Type Wiring Dip Switch, Down

P/N	Sensor	Input Type			Wiring
		Dip Switch
various	Temp Sensors	Up	1.	Connect one lead to the odd
	and Probes			numbered terminal and the
				other lead to the even num-
				bered terminal (polarity
				insensitive).
various	Digital Sensors	Up	1.	Connect one lead to the odd numbered
	(Klixons, Sail			terminal and the other lead to the even
				numbered terminal (polarity insensitive).
	Switches, etc.)
800-2100	Pressure Trans-	Up
800-2200	ducers (Emer-		1.	Connect RED power
	son Retail
800-2500				wire to +5VDC sup-
	Solutions) 100,			ply on input board.
	200, 500 lb. rat-		2.	Connect WHITE sig-
	ings			nal wire to even num-
				bered terminal.
	(0.5-4.5VDC
			3.	Connect BLACK
	output, 5VDC			ground wire to odd
	input voltage)			numbered terminal.
			4.	Connect the bare
				SHIELD wire to odd
				numbered terminal.
203-5750	Relative Humid-	Down
	ity Sensor		1.	Wire the “P”
				sensor terminal
				to 12VDC sup-
				ply on board.
			2.	Wire the
				“GND” sensor
				terminal to odd
				numbered ter-
				minal.
			3.	Wire the
				“OUT” sensor
				terminal to even
				numbered ter-
				minal.
			4.	Jumper sensor
				terminal “N” to
				sensor terminal
				“GND”.

Table 9-1- Sensor Wiring

The 16AI, 8IO, and MultiFlex Inputs Input and Output Setup • 9-3