Emerson E2 operation manual Alarm Name Default Definition Priority

Alarm Name	Default	Definition
	Priority
External Fault	30	An external fault input defined in a Multiflex PAK
		controller has indicated a failure. External fault
		inputs in the PAK are used to detect a Rack (Pack)
		failure produced by some device out of the PAK's
		control.
Failed Attempt To Bind Input	50	A valid link could not be made between an E2 appli-
		cation and an input assigned to it.
Failed Sensor Or Bad Wiring	20	E2 is unable to get a valid sensor value due to a possi-
		ble hardware problem.
Failed To Create logging	20	E2 is unable to create logs for the input or output
		shown.
Failed to Obtain DHCP Lease	20	Failed to obtain a DHCP lease from the DHCP
		Server, when a lease is requested. This happens at
		system startup, if a DHCP lease is requested, or if the
		user switches to using DHCP.
Failed to Renew DHCP Lease	20	DHCP Lease failed to renew altogether. DHCP
		Leases are renewed at an interval of half the time of
		the requested lease. If the lease is for 5 days, then a
		renewal will happen at 2.5 days. If this fails, it will
		retry at the ¾ of the lease time. If both attempts fail,
		the alarm is generated.
Fax Init String Is Not Valid	30	The fax initialization string for the E2’s modem is
		incorrect and may need editing.
Features denied during restore	99	License manager has denied permission to access a
		feature during a restore. Either the license for that
		feature is invalid or it does not exist, or the number of
		licenses for that feature is less than the number
		needed for the configuration. Further information
		may be found in the service log.
Features denied during startup	99	License manager denied permission to access a fea-
		ture during startup. Either the license for that feature
		is invalid or it does not exist, or the number of
		licenses for that feature is less than the number
		needed for the configuration. Further information
		may be found in the service log.
File Not Found	50	An internal error has occurred in the E2.
Firmware File Bad - AI200	15	A 16AIe has corrupted firmware.
Firmware File Bad - RO200	15	An 8ROe has corrupted firmware.
Firmware File Bad - CC100 Liq	15	A CC-100P or CC-100LS has corrupted firmware.
Firmware File Bad - CC100 Suct	15	A CC-100H has corrupted firmware.
Firmware File Bad - CS100 Ckt	15	A CS-100 has corrupted firmware.
Firmware File Bad - ESR8	15	An ESR8 has corrupted firmware.
Firmware File Bad - RT100	15	An RT-100 has corrupted firmware.

C-6 • E2 RX/BX/CX I&O Manual 026-1614 Rev 4 5-JAN-2013