JRV210

BASIC OPERATION

Mode

3

18

24

 

 

 

 

 

JRV210

 

 

 

 

 

 

 

17

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

16

 

 

 

 

 

 

 

14

 

 

 

 

 

 

 

4

INFO

 

 

 

 

 

 

DISP

 

 

 

 

 

FAV

 

 

 

 

 

 

 

26

 

 

 

 

 

 

PTY/CAT

 

 

 

 

 

 

 

MENU

11

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

5

6

7

27

8

9

10

Press the MODE button (4) on the control panel to select a different mode of operation, as indicated on the display panel. Available modes include TUNER, SIRIUS, CD, USB, IPOD and

AUXILIARY.

23NOTE: IPOD or SIRIUS mode will be skipped if the module is not installed.

21Reset

12Use a ball point pin or thin metal object to press the RESET button (18). The reset button

20should be activated for the following reasons:

initial installation of the unit when all wiring is completed

15• function buttons do not operate

error symbol on the display

13

Audio Menu

19

 

Press the VOL/AUDIO SETTINGS control (1) on the control panel to access the Audio Menu.

22You can navigate through the Audio Menu items by pressing the VOL/AUDIO SETTINGS control repeatedly. Once the desired menu item appears on the display, adjust that option by turning the VOL/AUDIO SETTINGS control (1) within 5 seconds. The unit will automatically exit the Audio Menu after five seconds of inactivity. The following menu items can be adjusted. Use the volume control to adjust the Bass level range from “-7” to “+7”.

Power On/Off

Press the power button (3) to turn the unit on/off.

Volume Control

To increase the volume, rotate the VOL/AUDIO SETTINGS control (1) clockwise. The maximum level is “40”.

To decrease the volume, rotate the VOL/AUDIO SETTINGS control counter-clockwise.

Mute

Press the MUTE button (26) on the control panel to mute the audio output. “MUTE” will appear on the LCD display.

Treble Level

Use the volume control to adjust the Treble level range from “-7” to “+7”.

Balance (BAL)

Use the volume control to adjust the Balance between the left and right speakers from “L12” (full left) to “R12” (full right).

Fader (FAD)

Use the volume control to adjust the Fader between the rear and front speakers from “R12” (full rear) to “F12” (full front).

Press MUTE again to restore the audio output to the previous level.

6

Page 6
Image 6
Jensen JRV210 operation manual Basic Operation