Vornado VH110 OPERATING CONTROLS, Resetting Your Vornado Heater, Power On/Off, Thermostat

VH110 OPERATING CONTROLS

			1	POWER ON/OFF
3	2	1	2	HEAT
				Control energy consumption
				between a maximum of
				750 watts (I)
				1125 watts (II)
				1500 watts (III)
			3	THERMOSTAT
				Selectable heat settings

RESETTING YOUR VORNADO HEATER

Your Vornado Heater has a multi-level safety shut-off system designed to prevent overheating. Overheating may occur when the inlets or outlet are blocked, a foreign object prevents the blade from turning, or the appliance tips over. If this happens, the safety shut-off system will cut power to the heat element and you will need to manually reset the heater.

1.Set the POWER switch to OFF and unplug the unit.

2.Remove any obstructions.

3.Wait 5 –10 minutes, allowing the unit to cool down.

4.Plug in the unit and place in desired position.

5.Set the POWER switch to ON. Your Vornado Heater should now function normally.

If the safety shut-off system repeatedly shuts off your heater or if it will not reset after following the above procedure, DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer Services Department toll-free at 1-800-234-0604.

6 English