Alpine CDA-W560E Listening to Radio, Automatic Memory of Station Presets, FM1--3 FM1--3, 16-EN

Models: CDA-W560EG CDA-W560E

1 36
Download 36 pages 58.17 Kb
Page 18
Image 18
Radio Operation

Radio Operation

Manual Storing of Station Presets

1 See “Listening to Radio” and set the frequency to

 

(SEARCH)

that of the desired broadcast station.

 

 

/ / -

2 Press FOLDER/PRESET and within 10 seconds

 

 

press / or -, select

P-MEMO mode, and press

 

-/J / ENT..

 

BAND

P-MEMO A-MEMO

 

SOURCE/POWER

 

 

 

g

3 Within 10 seconds press / or -, select the

f

 

number (1 to 6) that you would like to store, and

 

press -/J / ENT..

 

-/J / ENT.

The blinking display will change to steady and the

 

 

broadcast station will be stored.

FOLDER/PRESET

Listening to Radio

1 Press SOURCE/POWER to select the TUNER mode.

The aerial will extend when the TUNER mode is set. (Only on cars equipped with a power aerial.)

Manual Storing of Station PresetsListening to Radio TUNER TAPE CD FM1-- 3  FM1-- 3 CHANGER* Automatic Memory of Station Presets

(* Only when the changer is connected)

2 Press BAND to select the band.

FM1 16-EN FM2 Manual background AM

3 Press g, for Manual backgroundManual background, Manual backgroundManual background to search for a desired broadcast station (frequency).

gf:

Manual mode

 

Press and hold to change the

 

frequency continuously.

:

Local mode (SEEK)

Manual backgroundManual backgroundManual backgroundManual background: Distance mode (DX SEEK) (Press and hold)

Manual mode:

The frequency is manually tuned in steps (Manual tuning).

Local mode:

Only strong stations will be automatically tuned in (Automatic Seek Tuning).

Distance mode:

Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).

FM1-- 3 Manual backgroundManual background FM1-- 3

A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM).

If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station.

Automatic Memory of Station Presets

1 Press BAND to display the band you wish to receive.

FM1 Manual background FM2 Manual background AM

2 Press FOLDER/PRESET and within 10 seconds press / or -, select Manual background A-MEMO mode, and press

-/J / ENT..

P-MEMO Manual background A-MEMO

The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength.

When the automatic memory has been completed, the tuner goes to the station stored in preset location no. 1.

If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began.

16-EN

Page 18
Image 18
Alpine CDA-W560E Listening to Radio, Automatic Memory of Station Presets, FM1--3 FM1--3, Radio Operation, 16-EN