Alpine CDA-W560EG owner manual Specifications

Specifications

FM TUNER SECTION
Tuning Range	87.5 – 108.0 MHz
Mono Usable Sensitivity	9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity	13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	80 dB
Stereo Separation	45 dB
AM TUNER SECTION
Tuning Range	531 – 1,602 kHz
Sensitivity (IEC Standard)	22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response	5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)	Below measurable limits
Dynamic Range	93 dB (at 1 kHz)
Signal-to-Noise Ratio	105 dB
Channel Separation	85 dB (at 1 kHz)
TAPE PLAYER SECTION
Tape Speed	1-7/8 ips (4.8 cm/sec)±0.7%
Wow & Flutter	0.06%WRMS
Signal-to-Noise Ratio
With Dolby B-TYPE NR	68 dB
Without Dolby NR	60 dB
Frequency Response
With Alpine Test Tape	30-20,000Hz
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Power Output	18 W RMS ⋅ 4*

*Primary amplifier ratings per CEA-2006 Standard

•Power output: measured at 4 Ohms and ≤ 1% THD+N

•S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 2V/10 k ohms

Weight	2.2 kg (4 lbs. 14 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	100 mm (3-15/16")
Depth	160 mm (6-1/4")
NOSEPIECE SIZE
Width	170 mm (6-11/16")
Height	96 mm (3-3/4")
Depth	28 mm (1-1/8")

•Due to continuous product improvement, specifications and design are subject to change without notice.

34-EN