Toshiba manual finished making copies or printing other jobs, GA-1120 operating system

44-7	GA-1120 Control Panel
Suspend Printing	Suspend communication between the GA-1120 and the copier. You must suspend
	printing if you want to interrupt the current GA-1120 job and use the copier to
	make copies or print another job first. Jobs continue to process on the GA-1120.
	After you make the copies, select Resume Printing to continue printing jobs from
	the GA-1120.
Resume Printing	Resume communication between the copier and the GA-1120 after you have
	finished making copies or printing other jobs.
Shut Down	Shut down all GA-1120 activity in the correct manner and then restart. Use this
	option instead of the power switch on the back of the GA-1120. The following
	options are available from the submenu that appears:
	Restart Server—Restarts the Fiery system software without shutting down the
	GA-1120 operating system.
	Shut Down System—Shuts down the Fiery system software and the GA-1120
	operating system.
	Reboot System—Shuts down and restarts the Fiery system software and the
	GA-1120 operating system.
Clear Server	Clear all jobs in all server queues, as well as all jobs archived on the GA-1120 hard
	disk, the index of archived jobs (in the Archive window), all FreeForm masters, and
	the index of FreeForm masters (in the FreeForm window). Check with your
	administrator or operator before choosing Clear Server. If an Administrator password
	has been set, you must enter it to access Clear Server.
Run Setup	Enter the Setup menu and change Setup option settings.
Run Diagnostics	This function is provided for service representatives only. For information about
	running diagnostics, contact your authorized service/support technician.
Calibration	Calibrate the GA-1120 using AutoCal. For more information, see the Color Guide. If
	an Administrator password has been set, you must enter it to access Calibration.