Toshiba GA-1120 manual Use Wins Name Server Yes/No No, Server Comments

44-32 Performing Setup from the Control Panel

Use Auto Config

Yes/No [Yes]

This option appears if you chose DHCP or BOOTP as the protocol for automatically obtaining the IP address of the GA-1120.

Choose Yes to have the GA-1120 use a WINS name server and automatically obtain its IP address. After making your choice, proceed to the Server Name option.

Choose No to proceed to the Use WINS Name Server option, where you specify whether to use a WINS name server, and then to the WINS IP Address option, where you specify its IP address.

Use WINS Name Server

Yes/No [No]

Broadcasts from SMB devices cannot pass across a router without a WINS name server. Setting up the WINS name server is outside the scope of this manual. To find out if a name server is available, contact your network administrator.

WINS IP Address [127.0.0.1]

This option appears only if you choose Yes for WINS Name Server. Change the default address to the correct IP address for the WINS Name Server. Obtain the correct address from your network administrator.

Server Name

Default Name

The server name is the name that will appear on the network for accessing the GA-1120 via SMB. The default name is the same as the server name assigned in Server Setup (see page 4-10).

Server Comments

Server comments (optional) can contain information about the printer. These comments are listed in the Properties of the GA-1120 in Network Neighborhood and can be up to 15 characters.