Toshiba manual Shutting down and rebooting the Fiery X3e, GA-1120 will reboot

77-12 Administering the GA-1120

Shutting down and rebooting the Fiery X3e

You may need to shut down the GA-1120 for service, or reboot the entire GA-1120 system. When you do so, fonts that have been downloaded to the hard disk drive are not deleted. Print jobs in the Hold queue, the Printed queue, and jobs that have been processed but not printed are not deleted; they will be available for printing when you restart the GA-1120.

TO SHUT DOWN THE GA-1120

1.Make sure that no jobs are being processed or printed (the activity light should be off).

2.Press the Menu button on the Control Panel to access the Functions menu.

3.Use the Down arrow to scroll to Shut Down. Press the Set button.

4.Use the Down arrow to scroll to Shut Down System. Press the Set button.

5.It is now safe to power off the copier using the main power switch.

NOTE: After powering off the copier, wait at least three seconds before powering it back on.

TO REBOOT THE GA-1120

1.Press the Menu button on the Control Panel to access the Functions menu.

2.Use the Down arrow button to scroll to Shut Down. Press the Set button.

3.Use the Down arrow button to scroll to Reboot System. Press the Set button.

The GA-1120 will reboot.