Toshiba GA-1120 manual Passwords from the Control Panel, Verify New Password

77-3 Setting passwords

Passwords from the Control Panel

For more information on Administrator access privileges, see page 3-3. For information on controlling print jobs with the job management tools, see the Job Management Guide.

NOTE: The Operator password can be set and changed only from Fiery WebSetup, local Setup, or Command WorkStation.

TO CHANGE THE GA-1120PASSWORD

1.Scroll through the main Setup menu and choose Change Password.

2.Enter and confirm the password, as described below.

New Password

Use the Up and Down arrow buttons to select the characters and the Left and Right arrow buttons to move between them. Enter characters from left to right, since the Left arrow button is also a Delete key. The password can be any combination of letters and numbers up to 19 characters. Choose Set when you are done. Be sure to keep track of the password.

NOTE: The only way to remove a password that you cannot remember is to reinstall the system software.

Verify New Password

Reenter the new password, exactly as you entered it initially. If you make a mistake, you are prompted to enter the password again. The new password is effective after you save changes and restart the GA-1120.