Toshiba GA-1120 manual Options are described in detail in the following pages

44-14 Performing Setup from the Control Panel

TO ACCESS NETWORK SETUP OPTIONS

1.Confirm that the network cable is connected to the GA-1120.

During Network Setup, the GA-1120 queries the network for zones, servers, and server-based queues. If you perform Network Setup without a connected and functioning network, default settings are used that may not meet your needs.

2.Choose Network Setup from the main Setup menu.

3.Choose Port Setup from the Network Setup menu.

4.To use Ethernet, choose Ethernet Setup from the Port Setup menu, and enter the appropriate settings.

5.When you have finished entering port settings, choose Exit Port Setup, and then choose Protocol Setup.

6.Enter the appropriate settings for the protocol or protocols you will use.

7.When you have finished entering protocol settings, choose Exit Protocol Setup, and then choose Service Setup.

8.Enter the appropriate settings for the services you will use.

The options are described in detail in the following pages.

TO EXIT NETWORK SETUP

1.When you have finished entering service settings, choose Exit Network Setup.

2.Choose Yes when prompted to save changes.

3.From the main Setup menu, choose another Setup or choose Exit Setup.