Toshiba GA-1120 manual NDS Setup, Enable NDS Yes/No No, Select NDS Tree

44-22 Performing Setup from the Control Panel

Network Setup

Service Setup

PServer Setup

NDS Setup

Before entering NDS settings, make sure the GA-1120 is connected to the network and that you have configured an NDS directory tree with a Printer, Print Server, and one or more Print Queue objects for GA-1120 jobs (see page 2-13). To perform NDS Setup, you may need permission to browse the NDS tree. If access to the Print Server is restricted, you need a login password.

The main objective of NDS Setup is to specify the Print Server object. In addition, you can indicate the location of the GA-1120 print queues.

NOTE: The terms NetWare server, Novell server, and IPX server are in common use and are used here interchangeably to mean the server on an IPX network running Novell NetWare networking software.

Enable NDS

Yes/No [No]

Select Yes if the NetWare servers you will use to print to the GA-1120 are running

NetWare 4.x/5.x in native mode.

Select NDS Tree

List of trees

Use the Up and Down arrow buttons to browse the list of NDS trees available to the

GA-1120. Choose Set when you have displayed the tree that contains the Printer, Print

Server, and Print Queue objects you previously defined for the GA-1120.

Your new NDS tree selection automatically overwrites any previous tree selection.

If you change the NDS tree selection and there are also current Bindery settings, you are alerted that they will be deleted. If you continue with NDS Setup, you can replace Bindery settings later. If you do not want to continue, press the Menu button to exit NDS Setup.