55-4 Setting up the GA-1120 from a Windows Computer

Date and Time—Specify the system date and time, which are recorded on the Job Log.

Enable Printed Queue—Specify whether to enable the Printed Queue, a storage location on the GA-1120 disk for recently printed jobs. You can reprint jobs from the Printed queue without resending them to the GA-1120. If the Printed queue is not enabled, jobs are deleted from the GA-1120 disk immediately after they are printed.

Jobs Saved in Printed Queue—Specify the number of jobs to be stored in the Printed Queue. Jobs in the Printed queue take up space on the GA-1120 hard disk.

Delete Scan Jobs Specify how often to delete scan jobs from the GA-1120 hard disk. Choose Manually to delete scan jobs manually on a job-by-job basis. Click Delete Scan Jobs Now to delete scan all jobs immediately.

Use Character Set—Specify whether the Control Panel and the job management tools should use the Macintosh, DOS, or Windows character set for displaying file names. This is important if a file name includes accented or composite characters (such as é or æ). For mixed-platform networks, select the setting that gives the best overall representation of the special characters you use.

Print Start Page—Specify whether the GA-1120 should print a start page when it is turned on or restarted. The Start Page displays information about the GA-1120, including server name, current date and time, amount of memory installed, network protocols enabled, and print connections published.

Support—Enter names, phone numbers, and e-mail addresses of contact people at your organization who provide support for the GA-1120 and the copier. In remote Setup, use the Support tab.

Page 102
Image 102
Toshiba manual Setting up the GA-1120 from a Windows Computer