Toshiba GA-1120 manual Network Setup options, Save Changes Yes/No Yes

44-12 Performing Setup from the Control Panel

Clear Each Scan Job

After 1 day/Now/Manually/After 1 week [After 1 day]

Specify how you want to remove scanned data from the HDD. If you select Manually, the scanned data remains on the HDD until specifically deleted, or until all scanned jobs are cleared by the Administrator.

Save Changes

Yes/No [Yes]

Select Yes to activate any changes made in the Server Setup; select No to return to the main Setup menu without making any changes.

Network Setup options

Network Setup configures the GA-1120 to receive print jobs over the network systems that are used at your site.

In the Setup menu, choose Network Setup, where you specify network addresses and names to be used by workstations, servers, and the GA-1120 when they communicate with each other.

The Network Setup menu includes three submenus that allow you to choose port types, protocols, and network services. You must perform Port Setup and enable at least one port.

For each item you enable, you are prompted to enter settings for that item. Default values, where applicable, appear in this manual with square brackets.

You should display and select options only for the network systems that are currently used at your site. If your network requirements change, you can change Network Setup at any time.

If the GA-1120 is configured to enable more than one protocol, it automatically switches to the correct protocol when it receives a print job.