Toshiba GA-1120 manual No NetWare print

AA-4 Troubleshooting

After this Setup screen	This message	Means
Add Server, Enter Your Login	No NetWare print	No print server was found when GA-1120 queried the file
Name, Enter Your File Server	server found.	server you selected.
Password		You must configure a print server and a print queue for
(Network Setup>Service		every NetWare file server that will handle GA-1120 print
Setup> PServer Setup>		jobs (see page 2-10).
Bindery Setup)
Any Bindery Setup screen	Novell error code, followed by	Novell NetWare has reported an error. Command
	a message.	WorkStation reports the error number and displays a
		brief message.
		For the most common errors (listed in the following table),
		a screen is displayed that allows you to retry the action that
		evoked the error, such as adding a server. If that is
		not possible, you are prompted to notify the Novell
		administrator, who will need to troubleshoot the network.
		Consult NetWare Administrator documentation for
		further explanation of Novell error codes.

In Network Setup, when you configure the IPX (Novell) connection, the GA-1120 queries the network for Novell file servers and trees, and attaches to them temporarily. If a guest login is enabled, it will be used. If not, you are prompted to log in from Command WorkStation.

If the selected NetWare file server or tree does not have a guest account, or if the guest account has expired or been disabled by the NetWare supervisor, you will be prompted to notify the IPX (Novell) administrator. In that case, there are two options:

•Enable a guest account on the NetWare server or tree for the purpose of setup.

•Log in with a different account. At the ENTER LOGIN NAME screen, change the default name (guest) to supervisor or enter another valid login name. When you are prompted for a password, enter the correct password for the account you named.