Toshiba GA-1120 manual Enable NDS No NDS trees found

AA-2 Troubleshooting

After this Setup screen	This message	Means
Enable NDS	No NDS trees found.	No NDS trees were found on the Novell network. Check
(Network Setup>Service		to see that the frame types on the GA-1120 are properly
Setup>PServer Setup>NDS		configured.
Setup)
Select NDS Tree	Warning! Selecting a new	You have previously connected the GA-1120 to a different
(Network Setup>Service	NDS tree deletes Bindery	NDS tree. NetWise supports only a single NDS tree
Setup>PServer Setup>	setup.	connection. To avoid a potential conflict with an existing
NDS Setup)		tree connection (for example, if the connection was made
		through a NetWare 4.x server in emulation mode), all
		bindery settings will be deleted.
		If you choose OK, and choose Yes in the following message
		(Delete Bindery setup and continue?), bindery settings are
		deleted and have to be re-entered in Bindery Setup.
		To avoid deleting the bindery settings, press the Menu key,
		or select OK and choose No in the following message
		(Delete Bindery setup and continue?).
		Repeat NDS Setup without changing the NDS tree, or exit
		to Bindery Setup to review your current bindery settings.
Navigating NDS tree	___ is empty.	The chosen container contains no sub-containers or objects
(Network Setup>Service		relevant to the current mode of navigation.
Setup>PServer Setup>
NDS Setup)
Bindery Setup	If you also plan to use NDS,	No NDS settings are present. You are reminded to perform
(Network Setup>Service	set up NDS before Bindery.	NDS Setup before Bindery Setup in case your network
Setup>PServer Setup>		includes both NDS and bindery servers.
Bindery Setup)
Select File Server From List	Error. Cannot open bindery	Select this server through NDS setup or disable NDS and
(Network Setup >Service	connection to NDS server.	select it through bindery.
Setup>PServer Setup>
	No NetWare file	No file server was found when GA-1120 queried the
Bindery Setup)
	server found.	network to create a list of supported servers or a list of all
		servers.
		Check cable connections and make sure the NetWare
		server is turned on.