Toshiba GA-1120 manual Setting up a NetWare print queue for bindery

22-13 GA-1120 on a NetWare 4.x or 5.x network

Setting up a NetWare print queue for bindery

For NetWare 3.x and for NetWare 4.x in emulation mode, the NetWare print server and print queue for the GA-1120 are created and configured from NetWare Print Console (PCONSOLE), a NetWare utility that is stored in the NetWare PUBLIC directory.

As with NDS, you can create several NetWare entities on a Novell server, and then you can select them in Network Setup (see page 4-21).

Setting up NetWare Windows clients for printing

Before setting up client workstations for printing, perform Network Setup (see

page 4-12), and verify that the settings reflect the entities you created in the NetWare administrator utilities (see page 2-10).

NOTE: For printing to the GA-1120, connect all Windows clients to a NetWare server and permit them to connect to the Netware print server or servers on which you defined a NetWare print queue for the GA-1120.

After the Novell server and the GA-1120 have been set up, client setup consists of:

•Installing the networking protocol, binding it to the network adapter card, and permitting the client to log in to the NetWare file server.

On Windows 9x/Me workstations, load both the IPX/SPX-compatible protocol and the Client for NetWare Networks from the Network Control Panel.

On Windows NT 4.0/2000/XP workstations, install Client Services for NetWare. Use the CSNW option in the Control Panel to set printing options and specify a preferred NetWare server.

•Setting up the GA-1120 as a PostScript printer by installing a PostScript printer driver and the GA-1120 PPD (PostScript printer description).

•Adding a network port and connecting the workstation to one or more NetWare queues that have been defined for the GA-1120.

•Installing GA-1120 software, such as color reference files. For details, see the User Software Installation Guide.