Toshiba GA-1120 manual Pat@test.com, Verify Password remote setup only-Reenter your password

55-28 Setting up the GA-1120 from a Windows Computer

Outgoing Mail Server—Specify the IP address or server name that communicates the appropriate mail server and contact information to the GA-1120.

NOTE: Both an Incoming and Outgoing mail server must be defined. If an Outgoing mail server is not defined, the e-mail service assumes that the incoming and outgoing server names are the same.

Timeout (seconds)—Specify the maximum amount of time that will elapse as the GA-1120 attempts to connect to the mail server.

Polling Interval—Specify how often the GA-1120 checks the mail server for relevant e-mail.

Attachment Maximum Size—Specify the maximum file size of a scan for the GA-1120 to send as an attachment. If the scan file exceeds this maximum, the file will automatically be sent as a URL.

Mailbox Account Name—Enter the mailbox name specified on the mail server.

This name tells the Fiery client mail service which account contains e-mail messages for the GA-1120.

NOTE: The account name entered in this field must first be specified on the mail server by the administrator.

Fiery E-mailAddress—Enter the name of the e-mail account. For example,

pat@test.com.

Password—Enter a password for accessing the mailbox account on the mail server.

Verify Password (remote setup only)—Reenter your password.

Administrator E-mailAddress—Enter the user name specified in GA-1120 setup.

The administrator authorizes a unique e-mail address to remotely administer e-mail services. If an error occurs while you are executing a scan to e-mail, the e-mail service sends an error message to the Administrator E-mail Address specified. The administrator can authorize additional administrator e-mail addresses from this e-mail address.