Toshiba GA-1120 manual PostScript Setup options

44-38 Performing Setup from the Control Panel

Save Changes

Yes/No [Yes]

Select Yes to activate any changes made in the Printer Setup; select No to return to the main Setup menu without making any changes.

PostScript Setup options

PS (PostScript) Setup allows you to set defaults for the GA-1120. Users can override most of these defaults on a job-by-job basis. However, users printing from UNIX or DOS command lines cannot override defaults from their applications. Therefore, you must set defaults in PostScript Setup. For information about these defaults, see the Printing Guide.

TO ACCESS POSTSCRIPT SETUP OPTIONS

1.In the main Setup menu, choose PS Setup.

2.Enter the options appropriate to the printing requirements at the site.

3.When you have finished, save changes.

In the list of options that follows, default values, where applicable, appear in square brackets.

Convert Paper Sizes

No Letter/11x17->A4/A3 A4/A3->Letter/11x17 [No]

Specify whether to convert paper sizes in documents automatically to the default paper sizes specified. For example, if you select Letter/11x17->A4/A3, a letter size document is automatically printed on A4 paper.

NOTE: This option works in conjunction with the Default Paper Sizes option. For example, if Convert Paper Sizes is set to Letter/11x17->A4/A3, and Default Paper Sizes is set to US, then jobs are printed A4/A3 size. This also includes GA-1120 system pages such as the Start Page, Test Page, and Job Log.

Toner Reduction On/Off [Off]

Specify whether to minimize the effects of “blasting”, which occurs when excess amounts of toner on certain media types “blast” beyond the color density boundaries defined in the print job.