![](/images/new-backgrounds/1202568/20256865x1.webp)
Chapter 5
Cajun Campus CLI (Command Line Interface)
This chapter provides instructions for the configuration of your Cajun P330 using the
The configuration procedure involves establishing a Telnet session or a serial connection and then using the Cajun P333T’s internal CLI. The CLI is command- line driven and does not have any menus. To activate a configuration option, you must type the desired command at the prompt and press Enter.
Conventions Used
The following conventions are used in this document to convey instructions and information:
•Commands are in boldface
•Variables that you supply are in pointed brackets <>
•Optional keywords are in square brackets [ ]
•Alternative but mandatory keywords are grouped in braces { } and separated by a vertical bar
•If you enter an alphanumeric string of two words or more, for example in the Set system location command on Page 48, enclose the string in inverted commas.
•Information displayed on screen is displayed in text font
Establishing a Serial Connection for Configuration
Perform the following steps to connect a
1Use the serial cable supplied to attach the
2Make sure that the serial port settings on the PC are 9600 baud, 8 bits, 1 stop bit and no parity.
3If you connected a PC, run a
4When you see the “Welcome to P330” menu and are prompted for a password, enter the User Level password norm
Cajun P333T User’s Guide | 23 |