Chapter 5 Cajun Campus CLI (Command Line Interface)
Set SMON License Command
The SMON license command enables you to activate the SMON capability of the Cajun™ P330 stack. A Cajun P330 stack can include several Cajun P330 modules. One SMON license is required per Cajun P330 stack. Installing the license is very simple. It involves connecting a terminal to one of the Cajun P330 modules and typing in a valid license number (included in the SMON License pack) using the Command Line Interface (CLI).
For a full description of the SMON License and the installation procedure please refer to the Installation Guide provided with the SMON License.
Show Commands
Show commands for Privileged level are identical to the show commands for the User level. These are described starting on page 33.
Sync time command
This command synchronizes the time of all modules in a stack.
The syntax for this command is: sync time
Get time command
This command retrieves the time from the network.
The syntax for this command is: get time
Clear Commands
Clear ip route command
Use the clear ip route command to delete IP routing table entries.
The syntax for this command is: clear ip route <destination><gateway>
destination | IP address of the network, or specific host to be added. |
gateway | IP address of the router. |
Example:
To delete the route table entries using the clear ip route command:
Console> (enable) clear ip route 134.12.3.0 192.1.1.1
Route deleted.
Console> (enable)
56 | Cajun P333T User’s Guide |
