NETGEAR DGFV338 manual Default Factory Settings, Table A-1. Default Configuration Settings

Appendix A Default Settings and Technical Specifications

Default Factory Settings

You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset.

•To perform a hard reset, push and hold the reset button for approximately 10 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in Table A-1below.

•Pressing the Reset button for a shorter period of time will simply cause your device to reboot.

Table A-1. Default Configuration Settings

Feature		Default Behavior
Router Login
	User Login URL	http://192.168.1.1
	User Name (case sensitive)	admin
	Login Password (case sensitive)	password
Internet Connection
	WAN MAC Address (Ethernet)	Use Default address
	WAN MAC Address (ADSL)	Use Default Address
	WAN MTU Size	1500
	Port Speed	AutoSense
Local Network (LAN)
	Lan IP Address	192.168.1.1
	Subnet Mask	255.255.255.0
	Gateway Address	0.0.0.0
	RIP Direction	None
	RIP Version	Disabled
	RIP Authentication	None
Default Settings and Technical Specifications		A-1

v1.0, April 2007