DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual

1

 

 

 

2

3

4

5

Figure 1-1

The table below describes each item on the front panel and its operation.

Table 0-1. Object Descriptions

Nos.

LEDs

Activity

Description

 

 

 

 

1

Power - 1

On (Green)

Power is supplied to the gateway

 

 

Off

Power is not supplied to the gateway.

 

 

 

 

2

Test - 2

On (Amber)

Test mode: The system is initializing or the initialization has failed.

 

 

Blinking (Amber)

Writing to Flash memory (during upgrading or resetting to defaults).

 

 

Off

The system has booted successfully.

 

 

 

 

3

Internet

Link/Act LED

 

 

LEDs

On (Green)

The WAN port has detected a link with a connected Ethernet device.

 

 

Blinking (Green)

Data is being transmitted or received by the WAN port.

 

 

Off

The WAN port has no link.

 

 

 

 

 

 

100 LED

 

 

 

On (Green)

The WAN port is operating at 100 Mbps.

 

 

Off

The WAN port is operating at 10 Mbps.

 

 

 

 

 

 

DSL LED

 

 

 

On (Green)

The DSL modem has detected a link with the Internet.

 

 

Blinking (Green)

Data is being transmitted or received.

 

 

Off

The DSL modem has no connection.

 

 

 

 

4

WLAN

On (Green)

A wireless connection is detected.

 

 

Blinking (Green)

Data is being transmitted or received.

 

 

Off

No link is detected or the radio is disabled.

 

 

 

 

Introduction

1-7

v1.0, April 2007

Page 27
Image 27
NETGEAR DGFV338 manual Object Descriptions, Nos LEDs Activity Description